Drag and Drop Questions
Your company has a private cloud that is managed by using a System Center 2012 infrastructure. The private cloud contains 200 servers that run Windows Server 2008 R2. All of the servers are managed by Operations Manager. The private cloud contains an application named App1 that is deployed on- demand to several servers. The servers that run the application are identified by a registry value set during the application’s installation. You create a monitor that targets all of the servers. You need to modify the monitor to only affect the servers that have the application installed. Which three actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
In Operations Manager 2007, you can create attributes to define a commonality within a group of objects that you want to monitor. After you create an attribute, you can create a group whose members are only objects that have the commonality described in your attribute. For example, if you want to monitor a set of servers that all have a common registry value, you create an attribute based on that registry value. To find the servers that have that registry value, you create a group that has a dynamic inclusion rule for only those servers that have the newly created attribute and target the group only to the server object type. Operations Manager then checks the registry of each server to see whether that registry value exists. If it does, that server is added as a member of the group.
When you create an attribute, you must select an object type as a target for it. Operations Manager adds the new attribute to the existing list of attributes for that object type. If the target you select is from a sealed management pack, the object type also is sealed and the new attribute cannot be added. Instead, Operations Manager creates a new object type to which it adds the new attribute. By default, this new object type is named after the original object type with _Extended appended to the original name. This new object type contains all the attributes of the original object type, in addition to the attribute you are creating. You can view existing attributes in the Monitoring area of the Operations console. If the attributes are defined within a sealed management pack, you can view the properties of the attribute but you cannot change them. The properties of an attribute include information about where the attribute information is stored, such as the registry or through WMI. You can create a new attribute for any monitored object, and you can change most of the properties of an attribute that you create. However, the Attribute Type property, which identifies the source of the attribute information such as the registry, cannot be changed after an attribute is created. http://systemscenter.ru/opsmgr2007.en/html/26d205e5-a26b-416e-93ae-9f33fe156311.htm
The network contains two servers named Server1 and Server2 that run Windows Server 2008 R2. The private cloud contains two servers. The servers are configured as shown in the following table.
The network segments are separated by a firewall. All of the TCP ports from 1 to 1024 are allowed on the firewall. You need to ensure that Server1 can send security events to Server2. What should you do?
A. From the firewall, allow TCP 51909 from Network1 to Network2.
B. From the firewall, allow TCP 5723 from Network1 to Network2.
C. Deploy an Operations Manager gateway server.
D. Deploy an SMTP smart host.
ACS Forwarders Separated from the ACS Collector by a Firewall Because of the limited communication between an ACS forwarder and an ACS collector you only need to open the inbound TCP port 51909 on a firewall to enable an ACS forwarder, separated from your network by a firewall, to reach the ACS collector. http://technet.microsoft.com/en-us/library/bb309575.aspx
Your company has a private cloud that is managed by using a System Center 2012 Operations Manager infrastructure. The network contains a Microsoft Exchange Server 2010 organization. You plan to import the Exchange Server 2010 Management Pack. You need to configure Operations Manager to send Exchange-related notifications to Exchange Server administrators. What should you create first?
A. a channel
B. a User Role
C. an Exchange Server 2010 Send Connector
D. a monitor
E. an Exchange Server 2010 transport rule
Operations Manager also allows you to create custom roles based on the Operator, Read-Only Operator, Author, and Advanced Operator profiles. When you create the role, you can further narrow the scope of groups, tasks, and views that the role can access. For example, you can create a role entitled “Exchange Operator” and narrow the scope to only Exchange-related groups, views, and tasks. User accounts assigned to this role will only be able to run Operator-level actions on Exchange-related objects.
Notification Accounts and Groups Individuals in your company that will interact with Operations Manager frequently, such as an Exchange administrator who has been assigned to the Exchange Operator role, need a way to discover new alerts. This can be done by either watching the Operations console for new alerts or by Operations Manager informing them about the alert via supported communications channels. Operations Manager supports notifications through e-mail, instant messaging, Short Message Service, or pager messages. Notifications on what the role needs to know go out to recipients that you specify in Operations Manager. An Operations Manager recipient is merely an object that has a valid address to receive the notification, such as an SMTP address for e-mail notifications.
Therefore, it is logical to combine role assignment with notification group membership via an email- enabled security group. For example, create an Exchange Administrators security group and populate it with individuals that have the knowledge and permissions to fix things in Exchange. Assign this security group to a custom created Exchange Administrator role so they have access to the data and are e-mail-enabled. Then, create a recipient by using the SMTP address of the email- enabled security group.
References a channel here:
Your company has a private cloud that is managed by using a System Center 2012 Operations Manager infrastructure. The network contains an SMTP host named mail.contoso.com. You need to configure Operations Manager to use mail.contoso.com to send email notifications. What should you do?
A. Create a channel.
B. Configure the agent proxy setting.
C. Create a rule.
D. Create an internal connector subscription.
How to Enable an Email Notification Channel
To configure alert notifications for System Center 2012 ?Operations Manager, your first task is to enable a notification channel. This topic describes how to configure a channel that will send alert notifications to subscribers by using email.
Your company has a private cloud that is managed by using a System Center 2012 infrastructure. You deploy an application virtualization solution. You deploy a server named RDServer1, and then you install the Remote Desktop Services server role. RDServer1 is monitored by using Operations Manager. You deploy a virtualized application named VirtualApp1 to RDServer1. You need to set the state of RDServer1 to critical if CPU utilization by VirtualApp1 exceeds 70 percent for two minutes.
What should you create?
A. a service level objective (SLO)
B. an event subscription
C. an application profile
D. a monitor
E. a rule
You can configure a service level objective (SLO) to define the availability and performance goals for an application. In the following procedure, you create a new service level (LOB Application 1) against a distributed application, define a Monitor SLO that is based on availability (99.9% up-time), and define a Collection Rule SLO that is based on a performance rule (80% average processor time). http://technet.microsoft.com/en-us/library/d
Your company has a private cloud that is managed by using a System Center 2012 infrastructure. The Service Manager management server is installed on a server named Server1. The Configuration Manager site server is installed on a server named Server2. You create a baseline and several configuration items. You need to configure Service Manager to create incidents for each Service Manager configuration item that is non-complaint with the baseline. What should you create?
A. a task and a Desired Configuration Management Event Workflow
B. a channel and a subscription
C. a connector and a Desired Configuration Management Event Workflow
D. a subscription, a connector, and a task
A connector is required to bring data from Configuration Manager into Service Manager. From there, you create a Desired Configuration management Event Workflow. Using Connectors to Import Data into System Center 2012 – Service Manager http://technet.microsoft.com/en-us/library/hh524326.aspx
How to Configure Desired Configuration Management to Generate Incidents http://technet.microsoft.com/en-us/library/hh495577.aspx
Drag and Drop Questions
You plan to automate a task by using System Center 2012 Orchestrator. You create a new runbook that uses multiple input parameters and invokes a nested runbook. You need to verify that the runbook executes successfully. Which three actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
Your company has a private cloud that is managed by using a System Center 2012 infrastructure. The network contains 50 virtual machines that run Windows 7. Each virtual machine has an application named Appl.exe installed. A new version of Appl.exe is released. You need to identify which virtual machines have the outdated version of App1.exe installed. What should you do?
A. From Operations Manager, create a monitor.
B. From Configuration Manager, deploy a Desired Configuration Management baseline.
C. From Service Manager, create a Virtual Machine Manager (VMM) connector.
D. From Virtual Machine Manager (VMM), deploy a service template.
Desired configuration management in Configuration Manager 2007 allows you to assess the compliance of computers with regard to a number of configurations, such as whether the correct Microsoft Windows operating system versions are installed and configured appropriately, whether all required applications are installed and configured correctly, whether optional applications are configured appropriately, and whether prohibited applications are installed. Additionally, you can check for compliance with software updates and security settings. http://technet.microsoft.com/en-us/library/bb680553.aspx
Your company has a private cloud that is managed by using a System Center 2012 infrastructure. The network contains an Operations Manager infrastructure and a Service Manager infrastructure. You need to configure Service Manager to create incidents automatically based on Operations Manager alerts. Which object should you create from the Service Manager Console?
A. a subscription
B. an incident event workflow
C. a connector
D. a queue
Your company has a private cloud that is managed by using a System Center 2012 Orchestrator, System Center 2012 Operations Manager, and System Center 2012 Service Manager infrastructure. You discover that a service on a server repeatedly stops. You need to configure a solution to remediate the recurring issue automatically. What should you do?
A. From Service Manager, create an incident template.
B. From Service Manager, configure an incident event workflow.
C. From Operations Manager, configure the CI connector.
D. From Operations Manager, create a monitor.
If you want to pass the Microsoft 70-246 Exam sucessfully, recommend to read latest Microsoft70-246 Dump full version.